info@glassjarbottle.com [email protected] 0086-18124801920 0086-18124801920
Sitemap
English English English
Small Glass Jars With Lids,Small Glass Bottles, Glass Containers Wholesale
Home > faq

pic

03-27

How to prevent the Clear Mugs from breaking

  Nowadays, Clear Mugs gets the favour of consumer more and more, not only have the art glass with stronger adornment effect such as ground glass, hot melt glass, coloured drawing glass, still have a variety of functional glass, the clip that for example sound insulation reduces a noise is mixed glass, hollow glass and the fireproof glass with heat insulation flame-retardant. This article will introduce how to prevent the Clear Mugs from breaking and how to remove the rust from the Clear Mugs.

Clear Mugs

First, how to prevent the Clear Mugs from breaking

  1. put a teaspoon in the cup, when boiling water poured into the bottom of the cup, in has not had time to hot hot Clear Mugs by a poor conductor of heat, water will save a part of good conductors of heat between the metal TSP, as a result, the temperature of the water reduced, it through the boiling water into hot water, the Clear Mugs is no hinders. As for the boiling water, it was not so terrible for the cup, for it was already a little hot.

  2. Put the Clear Mugs in water and boil it for 10 minutes. After the Clear Mugs is heated evenly, it will not generate strong pressure and will not cause the Clear Mugs to break. Or you can put a little hot water in the cup before filling it with boiling water, and then pour the hot water without bursting.

  The reason why the Clear Mugs teapot breaks under the hot water: the Clear Mugs will be broken by the hot water, because of the uneven expansion of the Clear Mugs. When hot water enters the cup, the inner and outer walls of the cup cannot be heated at the same time. At first, only the inner wall of the cup was heated, while the outer wall remained cool, causing the inner part to expand rapidly while the outer wall remained unchanged. So the outside will be subjected to the inside of the strong pressure, the Clear Mugs will break.

Clear Mugs

Second, what method can remove Clear Mugs tea rust

  The tea rust can be wiped off the cup with salt and toothpaste. Above all, the tool that swab is like gauze or paper towel soaks wet, dip in with soggy gauze next on a few edible salt, the gauze that used to dip in salt wipes the tea inside cup rusts, its effect is very notable. Squeeze the toothpaste on the gauze, scrub the stained cup with the toothpaste, if the effect is not significant, you can squeeze more toothpaste to wipe. After rinsing the cup with salt and toothpaste, it is ready to use.

  Clear Mugs tea pot pot body is glass, currently on the market is mostly produced by such a heat-resistant Clear Mugs, and filter and the lid with heat-resistant Clear Mugs or stainless steel metal material, such as whether high borosilicate Clear Mugs, or metal, stainless steel are all food grade of green environmental protection material, consumers can rest assured to drink.

                            If you want to learn more about Clear Mugs, Please click here

pic

03-25

Production process of Jam Jar Glasses

  We believe that every day will come into contact with all kinds of glass products, such as glasses, glass doors, glass Windows and so on. Although we are in constant contact with them, we do not know much about the types and properties of these glasses. However, the lack of understanding of glass materials often leads to various problems. We will introduce the production process of Jam Jar Glasses to help you further understand the quality requirements of Jam Jar Glasses.

Jam Jar Glasses

First, the production process of Jam Jar Glasses

  Jam Jar Glasses production process mainly includes, raw material preprocessing. The bulk raw materials (quartz sand, soda ash, limestone, feldspar, etc.) will be crushed to dry the wet raw materials, iron containing raw materials for iron removal treatment, in order to ensure the quality of the Jam Jar Glasses. Batch preparation and melting. The glass compound material is heated at 1550~1600 ℃ in the pool kiln or pool furnace to form uniform, bubble-free liquid glass which meets the molding requirements. The liquid glass is put into the mold to make the desired shape of the glass products, such as plates, various vessels, such as heat treatment. Through annealing, quenching and other processes, to eliminate or produce stress in the Jam Jar Glasses, phase or crystallization, and change the structural state of the Jam Jar Glasses.

Jam Jar Glasses

Second, what quality requirements do Jam Jar Glasses have

  Jam Jar Glasses should have certain performance and reach certain quality standards.

  Jam Jar Glasses quality: pure and even, no sand, stripes, bubbles and other defects. Colorless glass has high transparency; The color of Jam Jar Glasses is uniform and stable, and can absorb certain wavelength of light energy.

  physical and chemical properties: has a certain chemical stability, and does not affect the dressing. It has certain shock resistance and mechanical strength, can withstand washing, sterilization and other heating, cooling process and bear filling, storage and transportation, in the face of general internal and external stress, vibration, impact, can remain intact.

  molding quality: to maintain a certain capacity, weight and shape, uniform wall thickness, smooth mouth, smooth to ensure convenient filling and good sealing. No distortion, surface is not smooth, uneven and crack defects.

                  If you want to learn more about Jam Jar Glasses, Please click here

pic

03-23

How to get rid of the smell in the Milk Glass Cups

  Glass is widely used in modern times and has always been a product with large market demand. By using a specific process, we can both make the best use of the properties of the glass and make up for its defects, which are no longer subject to the natural properties of the glass. For example, laminated glass can not only heat insulation, and the debris will not splash injury, safe and reliable. Here's how to remove odors from your Milk Glass Cups and how to remove tea stains from your Milk Glass Cups.

Milk Glass Cups

First, how to get rid of the smell in the Milk Glass Cups

  1. Apple peel can be used to wipe the Milk Glass Cups, remove the effect is very good. And it left behind the aroma of apples. Of course, you can also use soaked tea to wipe, the effect is also remarkable.

  2. Wash a little salt and water in a Milk Glass Cups.

  3.Put a few slices of lemon and orange peel in a Milk Glass Cups, or try a few drops of vinegar.

  4 milk expired can not drink, can be put in the dishcloth soaked, used to wipe the Milk Glass Cups, will soon be able to remove the dirt, to mold flavor is very effective

  5.Add some tea and boil it in water. It is effective to remove mildew

  6.Wipe with toothpaste to remove flavor and tea stains

  7. Hot 60 degrees of white wine through, and then brew strong tea; Put in microwave oven, 400 watts 10 minutes, natural cooling, 24 hours poured out; The smell of the cup completely disappeared.

  8. Wash it with vinegar or wine, or rub it with an orange peel and rub it twice more.

Milk Glass Cups

Second, how to remove tea scale from the Milk Glass Cups

  1. Get rid of the tea scale on the tea partition made of metal, when the tea partition made of metal is used, can become black because of tea scale, if use medium cleaner to also wash not to go, usable vinegar is immersed, or after soaking with bleach can go scale easily.

  2 get rid of the tea scale on Milk Glass Cups or teapot, teacup, teapot with a long time, will be a large number of tea scale, with a sponge dip in salt friction, can be easily removed.

  3. In addition to small pieces of tea scale, it can be soaked in the solution of bleach or cleaning powder, and placed overnight, you can remove the tea scale.

  4 potato skin to tea scale, simple removal method is: help with potato skin. Put potato skin in Milk Glass Cups, put boiling water next, cover up to cover, frowsty 5 ~ 10 minutes, shake a few again up and down, can get rid of the tea scale among them.

  5. Use toothpaste or broken egg shell to scrub, and then rinse with water.

  6. Soak in diluted vinegar for 30 minutes to make it shiny. Delicate tea set, can use cloth to touch vinegar to wipe, the place that finger cannot reach, can use soft bristle toothbrush to touch vinegar, the solution that salt mixes can be wiped gently.

                     If you want to learn more about Milk Glass Cups, Please click here

pic

03-20

How about the heat resistance of the Glass Beer Mugs?

  We believe that every day will come into contact with all kinds of glass products, such as glasses, glass doors, glass Windows and so on. Although we are in constant contact with them, we do not know much about the types and properties of these glasses. However, the lack of understanding of Glass Beer Mugs materials often leads to various problems. We will introduce you to how well the glass can withstand heat and help you to understand more about how high the Glass Beer Mugs can stand.

Glass Beer Mugs

①How about the heat resistance of the Glass Beer Mugs

  Good quality beer mugs are usually made of borosilicate Glass Beer Mugs.

  High borosilicate Glass Beer Mugs (also known as hard Glass Beer Mugs), is the use of Glass Beer Mugs in the high temperature state of conductive characteristics, through the heating in the glass to achieve glass melting, through advanced production technology, because the linear thermal expansion coefficient is (3.3 0.1)×10-6/K, also known as "borosilicate glass 3.3". It is a kind of special glass material with low expansion rate, high temperature resistance, high strength, high hardness, high light transmittance and high chemical stability.

  High borosilicate Glass Beer Mugs has good thermal stability, and the softening temperature is up to 820℃, which is enough for daily use.

Glass Beer Mugs

②How high temperature can the Glass Beer Mugs stand

  Ordinary Glass Beer Mugs will be added according to different needs of the corresponding impurities, silica content is relatively low, the general temperature of 600 degrees.

  Silica content of quartz Glass Beer Mugs up to 99.5%, the heat - resistant temperature reached more than 1600 degrees.

  The uniform heating of toughened Glass Beer Mugs can resist heat no more than 650 degrees, and the mechanical properties of toughened glass will gradually decrease beyond 388 degrees.

                   If you want to learn more about Glass Beer Mugs, Please click here

pic

03-19

Where should the quality of glass bottles and Airtight Glass Jars be tested

  Airtight Glass Jars has a good perspective, light transmission performance, chemical stability is high, and can be processed according to different methods to obtain a strong mechanical strength and heat preservation and insulation effect, and can even make the glass independent color, isolation of too strong light, so it is often used in all walks of life, to meet different needs. Next, please see where the quality of glass bottles and Airtight Glass Jars should be tested, as well as how much the customized price of large Airtight Glass Jars needs, to improve understanding.

Airtight Glass Jars

First, the quality of the Airtight Glass Jars from which the detection

  Glass bottles and Airtight Glass Jars should have certain performance and reach certain quality standards.

  (1)Airtight Glass Jars quality: pure and even, no sand, stripes, bubbles and other defects. Colorless glass has high transparency; The color of glass is uniform and stable, and can absorb certain wavelength of light energy.

  (2) physical and chemical properties: has a certain chemical stability, and does not affect the dressing. It has certain shock resistance and mechanical strength, can withstand washing, sterilization and other heating, cooling process and bear filling, storage and transportation, in the face of general internal and external stress, vibration, impact, can remain intact.

  (3) molding quality: to maintain a certain capacity, weight and shape, uniform wall thickness, smooth mouth, smooth to ensure convenient filling and good sealing. No distortion, surface is not smooth, uneven and crack defects.

Airtight Glass Jars

Second, how much the price of large Airtight Glass Jars customization needs

  Large Airtight Glass Jars is a rare piece of business in production and transportation. In daily use, it is generally based on the size of medium-sized national standard. Most large Airtight Glass Jars needs to be customized.

  The price of custom Airtight Glass Jars is influenced by many factors.

  1 and its thickness, size: this is the basic factor, mostly in the maw of custom Airtight Glass Jars, size, its thickness of Airtight Glass Jars, the consumption of raw material is different, the price is different also. But in large size custom ultra-thin glass, prices will rise, ultra-thin glass is very fragile, in the production or transportation damage rate is high, especially the cif delivery, the price would be high.

  2· performance and demand: toughened glass, bulletproof glass, coated glass, etc., different Airtight Glass Jars performance means that manufacturers have different processing procedures, the price must be different.

  3. Deep processing: Airtight Glass Jars punching, grooving, bending, shaped, and other processing means, if the need is the glass sheet, will not be affected by these factors, but if the need for deep processing, any process means an increase in costs.

  4, place of delivery: general architectural glass market radiation in 500 kilometers, more than 500 kilometers, there is no competitiveness, such as Inner Mongolia Airtight Glass Jars factory if the delivery of the goods to Shanghai, lose money under the condition of no Shanghai local glass product price cheap money. Within 500 kilometers of freight proportion is not high, production control better circumstances, transport costs can be neglected.

  5. Order quantity: it goes without saying that no one can produce single piece of glass for you, so you will get a discount if the quantity is large.

                     If you want to learn more about Airtight Glass Jars, Please click here

pic

03-17

How do you make molded Transparent Tea Cup?

  Nowadays, Transparent Tea Cup gets the favour of consumer more and more, not only have the art glass with stronger adornment effect such as ground glass, hot melt glass, coloured drawing glass, still have a variety of functional Transparent Tea Cup, the clip that for example sound insulation reduces a noise is mixed glass, hollow glass and the fireproof glass with heat insulation flame-retardant. This article will introduce whether Transparent Tea Cup water  are safer and how to make glass containers.

First, whether the Transparent Tea Cup material is safer

  1. Transparent Tea Cup material has good barrier properties, which can well prevent the invasion of oxygen and other gases inside the contents, and at the same time can prevent the volatile components of the contents from volatilizing to the atmosphere;

  2. Transparent Tea Cup can be used repeatedly, which can reduce the packaging cost;

  3. Transparent Tea Cup can be easily changed in color and transparency;

  4. Transparent Tea Cup are safe and hygienic, with good corrosion resistance and acid corrosion resistance, suitable for the packaging of acidic substances (such as green juice drinks);

Transparent Tea Cup

Second,How do you make molded glass containers

  First of all, it is necessary to design and make the mold. The glass raw material is quartz sand as the main raw material, and other auxiliary materials are dissolved into liquid at high temperature. Then, the Transparent Tea Cup is formed by injecting the mold, cooling, cutting and tempering. Transparent Tea Cup generally have rigid signs, signs are also made of mold shape. Transparent Tea Cup molding according to the production method can be divided into three kinds of manual blowing, mechanical blowing and extrusion. Transparent Tea Cup can be divided into the following components: one is sodium glass, two is lead glass, three is borosilicate glass.

  The main raw material of Transparent Tea Cup is natural ore, quartz stone, caustic soda, limestone and so on. Transparent Tea Cup are highly transparent and resistant to corrosion, and do not change in material properties in contact with most chemicals. Its manufacturing process is simple, the modelling is free and changeable, the hardness is big, the heat resistant, clean, easy to clean, and can be used repeatedly and so on. As a packaging material, Transparent Tea Cup are mainly used in food, oil, wine, beverages, condiments, cosmetics and liquid chemical products, etc. However, Transparent Tea Cup also have its disadvantages, such as large weight, high transportation and storage costs, and impact resistance.

               If you want to learn more about Transparent Tea Cup, Please click here

pic

03-16

How to choose a Glass Beer Bottles?

  Nowadays with the increase in the number of glass products, making more and more Glass Beer Bottles into the market, followed by also creates some wine enterprise company don't know should choose what kind of Glass Beer Bottles now, our company is a professional manufacturer of all kinds of Glass Beer Bottles, has 18 years of production experience, our factory can bottle design proofing, bottles, bottle wholesale, customized bottles, etc.

Glass Beer Bottles

  Liquor bottle packaging also tends to be more and more high-grade and exquisite, and the additional decoration technology of various liquor bottles is more and more diversified and more and more exquisite. Liquor bottles in the packaging process has baked flowers, spraying, gold and other forms. Baking process is in the glass liquor bottle surface treatment technology, is a plastic decals directly attached to the blown good milk Glass Beer Bottles, by the conveyor belt into the baking kiln, after the temperature belt, high temperature belt, temperature belt baking, can be made with fine color patterns of opal Glass Beer Bottles. Liquor bottle spraying is the process of applying pigment or coating to the surface of liquor bottle through a certain process. Sticking gold is to combine the traditional technology with the modern high-tech means, presenting a fine pattern on the surface of the bottle.

  1. Sealing of Glass Beer Bottles body and cover. This depends on the credit of the bottle cap gasket, which ACTS mainly as a seal between the bottle cap and the bottle.

  2, Glass Beer Bottles are divided into high white, crystal white, white and white bottles and color bottles, what kind of wine to choose what kind of bottle, such as maotai very multi-purpose milk white wine bottles, liquor bottles with transparent Glass Beer Bottles. Beer is in colored bottles.

Glass Beer Bottles

  3. Quality standards for Glass Beer Bottles. The quality of products can be analyzed and judged from the product quality standard of the manufacturer.

  4. Quality assurance system. China's traditional beverage packaging containers, glass is also a very historical packaging materials. In the case that many kinds of packaging materials flood into the market, glass container still occupies an important position in beverage packaging, which is inseparable from its packaging characteristics that cannot be replaced by other packaging materials. The supplier audit has become an essential part of the purchase of Glass Beer Bottles. Through the audit, can make the comprehensive and correct evaluation to the production plant's software, hardware facilities, technical equipment, quality comprehensive level.

                   If you want to learn more about Glass Beer Bottles, Please click here

pic

03-13

How to choose different kinds of Clear Glass Wine Tumbler?

  Clear Glass Wine Tumbler as a result of variety is rich, can apply to all sorts of occasions, because this prospect is capacious, get the love of consumer all the time. When we choose Clear Glass Wine Tumbler, besides paying attention to its price, we should also pay attention to the different properties of various kinds of glass, so as to choose the type more suitable for our own use. In order to help you understand the types and functions of Clear Glass Wine Tumbler, we collected information to compile this article, hoping to be helpful.

Clear Glass Wine Tumbler

I. classification and name of Clear Glass Wine Tumbler

  1.There are two kinds of Clear Glass Wine Tumbler, one is a big glass for red wine, the other is a small Clear Glass Wine Tumbler for white wine.

  2. The triangular goblet is used for drinking cocktails, the thin goblet is used for drinking champagne, and the saucer-shaped goblet is used for drinking champagne.

  3. The short body is very big. If you have a smaller mouth, the brandy cup is for brandy.

  4. Tall Clear Glass Wine Tumbler without feet, with the same size of mouth, are called tall Clear Glass Wine Tumbler (there are 1 Corinth cup, 2 water cups and 3 long drinks according to the height) for drinking non-alcoholic and some low-alcohol beverages and cocktails, long drinks and so on.

  5. With a large mouth and a small bottom, a short Clear Glass Wine Tumbler is called a whiskey glass, also known as a classic glass. People who drink whiskey also drink gin, vodka, tequila and so on.

  6. There is also a small Chinese white wine cup, called the spirit cup.

  A good Clear Glass Wine Tumbler can reveal the magnificent color of the wine, which is pleasing to the eye, and gather the aroma of the wine in the glass, which will last for a long time. Long round goblet for red wine, for example, round goblet for white wine, if only drink a wine that generally it is advisable to use the semicircle goblet, super long round goblet is dedicated to lane, sol two German white wine, funnel shaped glass is dedicated to the more intense wine, such as sherry and port, half tall pot-bellied special Clear Glass Wine Tumbler to drink brandy and other liquor, long foot cup should be used to drink champagne. In addition, the beer is multi-purpose the big Clear Glass Wine Tumbler with a handle, a cocktail style a lot, could be selected according to the configuration.

Clear Glass Wine Tumbler

Ⅱ.How to choose a Clear Glass Wine Tumbler

  1. The shape of a good professional Clear Glass Wine Tumbler must be elegant, supple, smooth and moist, round and thin, light and pleasant weight. On the one hand, it has a perfect sense of beauty and touch. In addition, the wine must have a crystal clear texture and excellent transparency, so that the taster can fully observe the color, clarity, bubbles and layers of the wine.

  2. Handmade and machine-blown cups look very similar in shape, but the price is far from the same. As long as careful observation, hand cup in radian particularly delicate washing, if touch the foot of the cup with the finger, the machine cup can often feel a straight from the top down through the fine seam, not difficult to identify.

  3. Pour in Clear Glass Wine Tumbler red wine advice not to pour too full, in general, pour about 1/2 ~ 1/3 to glass is enough, but the champagne is poured to about 1/2 ~ 2/3, for the beauty of the golden colour and lustre and bubbles.

  4. When holding a Clear Glass Wine Tumbler, it is recommended to hold the foot or base of the glass lightly with your fingers. Before drinking, gently rotate and shake the glass to make the wine gas emanate and smell the aroma. Do not hold the cup in the palm of your hand to avoid affecting the temperature of the wine.

  5. A good Clear Glass Wine Tumbler can increase the visual temptation, heighten the aesthetic perception of the wine.

  If you want to learn more about Clear Glass Wine Tumbler, Please click here

pic

03-12

Glass Food Storage Canisters Jar

  Cailos is from Brazil and she told me she need 240 ml Glass Food Storage Canisters Jar.

  The first time i received  her inquiry is on Alibaba and she said that she needed Glass Food Storage Canisters,She can't speak English and she told me directly that this is the first time she bought something on Alibaba.

Glass Food Storage Canisters

  I just tell her that we have this Glass Food Storage Canisters and ask how many quantity does she needs.She told me through her national language that she wants a quote of 3000 /5000 and 10000pcs.I told her this product our MOQ is 10000pcs and quickly sent the offer to her.

  The first offer was not going well because she needed a 240 ml glass jar and i recommend a full mouth capacity of 250 ml for her.She told me that she must need 240ml,not 250ml.I asked her before 240ml is canned capacity or full capacity.but she do not understand.

  I had to do my best to convince her and tell her that this Glass Food Storage Canisters is suitable.I suggest that she can have a sample to test if it is suitable, she accepted and gave her address to me let me helped her check the freight cost.Later communication, because she doesn't know English and is a new buyer, I communicate with her through translation software.I think she will be easy to understand when I use her language to communicate with her.It turns out that it is easier to understand what I mean than to communicate with English.

Glass Food Storage Canisters

  She did not accept the courier fee for the sample, she told me a little expensive for one sample,So I can only let her know the Glass Food Storage Canisters by taking a video clearly.Because we communicated for a while, she also felt that the glass jar was suitable, so she told me she could try it.

  I sent her the final offer, based on 10,000 pcs with black lid.She is very satisfied with the price,But we have another difficulty because she is a new buyer and is the first time to buy something on Alibaba.I let her to tell me about her nearest port. She told me what she need to do when the goods arrived.I patiently answered these questions with her because we sent the goods to her by sea,When the goods arrive at the port, she needs to pick up the goods.She needs to clear the customs before picking up the goods.I suggest that she can find a local customs clearance company to help her.

  Fortunately, the goods finally arrived at the destination port smoothly.Carlos is very satisfied with our Glass Food Storage Canisters.

      If you want to learn more about Glass Food Storage Canisters, Please click here

pic

03-11

Vacuum Flask are an integral part of medicine

  As an inorganic material of silicon (XSiO3), Vacuum Flask has relatively stable performance and is smooth and transparent, which is especially suitable for packaging, storage and quality assurance of drugs. At the same time, Vacuum Flask is cheaper than other materials. In recent years, with the rapid development of pharmaceutical industry, medicinal glass industry in our country and the product obtained the rapid development and improving, has become the main packaging materials in the field of pharmaceutical packaging, Vacuum Flask packaging material is widely used in injection, powder injection, the lyophilizer, biological products, blood products, oral liquid, health care products, such as Vacuum Flask are widely used in various kinds of pharmaceutical packaging.

Vacuum Flask

  In our country's Vacuum Flask packaging technology textbooks, various kinds of glass are divided into 11 categories. According to its manufacturing process, pharmaceutical Vacuum Flask belong to bottle glass, but according to their performance and use, they belong to instrument glass. Vacuum Flask China's traditional beverage packaging containers, glass is also a very historical packaging materials. In the case of many kinds of packaging materials flooding into the market, glass containers still occupy an important position in beverage packaging, which is inseparable from its packaging characteristics that cannot be replaced by other packaging materials. As drugs belong to special commodities, the chemical composition, properties and quality requirements of various medicinal glass products as their packaging containers are better than ordinary Vacuum Flask. For a long time, low borosilicate glass container is the main packaging of injection in China. However, the use of low borosilicate glass containers with low water resistance level can easily lead to drug dislopping, white spots and other visible foreign bodies in the effective period. As an integral part of medicine, pharmaceutical packaging materials are closely related to the development of pharmaceutical industry.

Vacuum Flask

  Pharmaceutical Vacuum Flask are widely rejected by the market because of their weight and fragility. However, in recent years, with the aa-phenol event in plastic milk bottles and the plasticizer event in plastic bottles, pharmaceutical Vacuum Flask have returned to the market position. Pharmaceutical Vacuum Flask have the following competitive advantages: they have good chemical stability and will not pollute the contents of bottles due to the rise of temperature and release of toxic substances; Vacuum Flask hardness is high, will not be due to extrusion and deformation, otherwise the container can not avoid extrusion; The use of Vacuum Flask to contain drugs, consumers more assured, Vacuum Flask thousands of years of history, its safety has been widely recognized, the products are safer, and easy to disinfect; Modelling can be changeable, easy to decorate, dressing products show high - grade, promote sales.

    If you want to learn more about Vacuum Flask, Please click here

pic

03-06

all kinds of Glass Thermos Bottle

There are many kinds of glass and wide use. In addition to common quartz glass and tempered glass, there are various types such as optical glass, color-changing glass and laminated glass. Due to the wide variety of glass, it is even more important to choose the right type. In order to better clean the glass, we need to know all kinds of Glass Thermos Bottle, familiar with the cleaning method of glass materials, and understand how the Glass Thermos Bottle should be cleaned.

Glass Thermos Bottle

First, how to clean the Glass Thermos Bottle material

  Various Glass Thermos Bottle instruments should be used in the experiment. Whether these glass instruments are clean or not will directly affect the accuracy of the experimental results. Therefore, the glass instruments must be cleaned before the experiment.

  General glass instruments, such as beakers, flasks, conical flasks, test tubes and measuring cylinders, can be brushed with water from the outside to the inside, so that water-soluble substances, partially insoluble substances and dust can be washed away; if there are oils and other organic substances It can be washed with decontamination powder, soap powder or detergent. Rinse with a brush dampened with detergent or detergent, then rinse with tap water, then rinse the inner wall with distilled or deionized water for 2 to 3 times. The cleaned Glass Thermos Bottle instrument should have an inner wall that can be evenly wetted by water without water streaks and without water droplets. In organic experiments, glassware with a grinding mouth is often used. When cleaning, care should be taken to protect the grinding mouth. It is not advisable to use detergents instead of detergents.

  For Glass Thermos Bottle instruments that are not easily brushed with a brush or that are not cleaned with a brush, such as a burette, a volumetric flask, a pipette, etc., usually the detergent is poured or sucked into a container for a period of time, and the inside of the container is washed. The solution is poured into a Glass Thermos Bottle for use, and then rinsed with tap water and deionized water.

  The sand core Glass Thermos Bottle filter shall be cleaned immediately after use. For the different sediments remaining in the filter sand core, the solid precipitated on the surface of the sand core is dissolved by a suitable detergent, and then the sand core is repeatedly washed with a vacuum. The remaining sediments were all washed away, rinsed with distilled water, dried at 110 ° C, and stored in a dust-proof cabinet.

Second, how should the Glass Thermos Bottle be cleaned?

Glass Thermos Bottle

  1, commonly used Glass Thermos Bottle as long as soaked in sour vinegar for 30 minutes, you can shine as new. Crystal glass and other delicate tea set, can be wiped with cloth vinegar, the details become black, with a soft toothbrush mixed with vinegar, salt mixed into The solution can be lightly wiped. In addition, after the glassware is rinsed with water, it is brushed off with warm water of about 40 degrees, and then allowed to dry naturally, and the tea stain on the bottom of the cup can also be removed.

  2, wipe some toothpaste at the bottom of the cup, then wipe with nylon cloth. You can also scrub with salt, the effect is also very good.

  3, it is easy to clean, especially the tea scale. Put the plastic bags into a ball, soak, put a small amount of edible alkali, scrub the cup, it is easy to clean.

       If you want to learn more about Glass Thermos Bottle, Please click here

pic

03-05

all kinds of Vacuum Flask Bottle

There are many kinds of glass and wide use. In addition to common quartz glass and tempered glass, there are various types such as optical glass, color-changing glass and laminated glass. Due to the wide variety of glass, it is even more important to choose the right type. In order to better clean the glass, we need to know all kinds of Vacuum Flask Bottle, familiar with the cleaning method of glass materials, and understand how the Vacuum Flask Bottle should be cleaned.

Vacuum Flask Bottle

First, how to clean the Vacuum Flask Bottle material

  Various Vacuum Flask Bottle instruments should be used in the experiment. Whether these glass instruments are clean or not will directly affect the accuracy of the experimental results. Therefore, the glass instruments must be cleaned before the experiment.

  General glass instruments, such as beakers, flasks, conical flasks, test tubes and measuring cylinders, can be brushed with water from the outside to the inside, so that water-soluble substances, partially insoluble substances and dust can be washed away; if there are oils and other organic substances It can be washed with decontamination powder, soap powder or detergent. Rinse with a brush dampened with detergent or detergent, then rinse with tap water, then rinse the inner wall with distilled or deionized water for 2 to 3 times. The cleaned Vacuum Flask Bottle instrument should have an inner wall that can be evenly wetted by water without water streaks and without water droplets. In organic experiments, glassware with a grinding mouth is often used. When cleaning, care should be taken to protect the grinding mouth. It is not advisable to use detergents instead of detergents.

  For Vacuum Flask Bottle instruments that are not easily brushed with a brush or that are not cleaned with a brush, such as a burette, a volumetric flask, a pipette, etc., usually the detergent is poured or sucked into a container for a period of time, and the inside of the container is washed. The solution is poured into a Vacuum Flask Bottle for use, and then rinsed with tap water and deionized water.

  The sand core Vacuum Flask Bottle filter shall be cleaned immediately after use. For the different sediments remaining in the filter sand core, the solid precipitated on the surface of the sand core is dissolved by a suitable detergent, and then the sand core is repeatedly washed with a vacuum. The remaining sediments were all washed away, rinsed with distilled water, dried at 110 ° C, and stored in a dust-proof cabinet.

Second, how should the Vacuum Flask Bottle be cleaned?

Vacuum Flask Bottle

  1, commonly used Vacuum Flask Bottle as long as soaked in sour vinegar for 30 minutes, you can shine as new. Crystal glass and other delicate tea set, can be wiped with cloth vinegar, the details become black, with a soft toothbrush mixed with vinegar, salt mixed into The solution can be lightly wiped. In addition, after the glassware is rinsed with water, it is brushed off with warm water of about 40 degrees, and then allowed to dry naturally, and the tea stain on the bottom of the cup can also be removed.

  2, wipe some toothpaste at the bottom of the cup, then wipe with nylon cloth. You can also scrub with salt, the effect is also very good.

  3, it is easy to clean, especially the tea scale. Put the plastic bags into a ball, soak, put a small amount of edible alkali, scrub the cup, it is easy to clean.

       If you want to learn more about Vacuum Flask Bottle, Please click here